Element 1 - Knowledge of motorcycle with engine switched off

The first element of the polygon is pushing the bike.
You must push the bike with the engine switched off to describe loop around the cones (see picture).
Councils are here to hold fast bike, not to lean a lot and collect his rear foot rests.
According to how the turns, you can open turning and a little more to finally enter the gates.

Element 2- Management with low speed (eight)

You can describe about eight cones (see picture), be careful with gas and pins.
Element is repeated twice.

Element 3 - Management of low velocity (slalom ride of a passenger)

You start at the boundaries between the four cone top.
Straight Slalom and stop at the end. Uploading a second person with whom you make a U-turn and return to the starting position.
The requirement is to return to second gear turn.

Element 4 - Avoiding the "obstacle"

You have to make slalom with 30 km / h, to return, develop 50 km / h, to slow sharply to avoid an obstacle.
The requirement states that the last cone to move with 50 km / h. Passage in this area with lower speed is unacceptable.
For an overview see the picture.

Element 5 - Emergency stop

Need to develop 50 km / h to pass the cones and stop.
For an overview see the picture.

Once the applicant can fulfill the five elements of the polygon in the Rules, starting training in urban environments.
Candidate causing academic bike is guided by the car handsfree, which makes behind him.

Good luck to all candidates!